Manfrotto Nitrotech N8 Head & Carbon Fiber Twin Leg Video Tripod Kit (100/75mm, Mid-Level Spreader)

Manfrotto Nitrotech N8 Head & Carbon Fiber Twin Leg Video Tripod Kit (100/75mm, Mid-Level Spreader)

B&H # MAMVKN8TWINM MFR # MVKN8TWINMCUS
Manfrotto Nitrotech N8 Head & Carbon Fiber Twin Leg Video Tripod Kit (100/75mm, Mid-Level Spreader)
Manfrotto Top seller

Show MoreLess

Close

Now Viewing:

In Stock
Order in the next 0:00:00 to ship today

Product Highlights

  • 17.64-Pound Load Capacity
  • Carbon Fiber Legs
  • 29.53 to 66.54" Height Range
  • Continually Variable Counterbalance
  • Fluid Drag System
  • Illuminated Bubble Level
  • Mid-Level Spreader
  • Padded Tripod Bag
Show moreShow less
0.0 (0)

Fluid Head: Nitrotech N8

Not available with current selections

Spreader Type: Mid-Level Spreader

$900.00
Manfrotto Nitrotech N8 Head & Carbon Fiber Twin Leg Video Tripod Kit (100/75mm, Mid-Level Spreader)
Add to Wish List Item in Wish List

Manfrotto MVKN8TWINMCUS Overview

  • 1Description

The Manfrotto Nitrotech N8 Head & Carbon Fiber Twin Leg Video Tripod Kit combines the innovative Nitrotech N8 fluid head with the 2-stage carbon fiber tripod legs and mid-level spreader, creating an effective combination of stability and smooth, precise control. The legs feature a 100mm half ball with a removable 75mm adapter that permits the mounting of the N8 head. The head features variable pan and tilt drag with independent locks and continuous counterbalance from 0 to 17.6 pounds.

The carbon fiber legs are durable, strong, and resistant to corrosion, especially corrosion caused by exposure to salt water, which aluminum legs are susceptible to. The mid-level spreader prevents the legs from splaying out, and the lever locks on the legs improve torsional stability so the legs won't shift as you pan. Included with this system is a padded carrying bag for storage and transport.

  • Nitrotech N8 Video Head

    The Manfrotto Nitrotech N8 Video Head features an innovative, continuous counterbalance system based on a nitrogen-piston mechanism. Unlike heads with stepped levels of counterbalance, the Nitrotech N8 can be precisely adjusted to the weight of your camera rig. Adjust the counterbalance by twisting the knob on the left side towards the front of the head. The knob itself can be extended with a pull, adding room useful with a wider camera. With a maximum payload capacity of 17.6 pounds, the Nitrotech N8 is designed to be used with a variety of video or DSLR/MFT camera rigs. This 75mm flat-base head can be used with a half-ball adapter (available separately) for maximum flexibility in mounting to tripods, sliders, hi-hats, or other supports.

    The Nitrotech N8 includes several pro-style features for reliable, efficient use of the head. The included camera mounting plate locks in from the side, and it has a sliding design to help balance the rig on the head. Smooth panning and tilting moves are enabled by the Nitrotech N8's variable fluid drag systems. A push-button illuminated bubble at the rear of the head lets you see at a glance if the head is leveled. Unlike some other Manfrotto heads, the N8's controls are on the left side of the head, freeing your right hand to operate the panhandle.

    Looking to lessen the weight of accessories on your camera rig? Attach your monitor, rangefinder, light, flag, etc. to the 3/8"-threaded Easy Link Connector built into the side of the Nitrotech N8. This transfers the weight of the accessory away from the camera and to the head, making the camera less top-heavy.

    Innovative nitrogen-piston counterbalance system provides precise adjustment based on your camera rig's weight
    Fluid drag system for smooth pan and tilt moves
    Lightweight head with 75mm flat base can be used with a half-ball adapter (available separately) for flexible configurations when using tripods, sliders etc.
    An Easy Link Connector is embedded in each panhandle mounting rosette, which enables the attachment of an accessory to the head itself, reducing weight on the camera body
    Left-sided controls free your right hand for operating the panhandle
    UPC: 719821397540
  • Carbon Fiber Twin Leg Video Tripod Legs with Mid-Level Spreader (100/75mm Bowl)

    The Manfrotto Carbon Fiber Twin Leg Video Tripod Legs with Mid-Level Spreader is suitable for use on flat, smooth surfaces as well as uneven terrain, and it features carbon fiber tubes that are both strong and lightweight while being corrosion resistant. The legs incorporate a 100mm half bowl and include a 75mm adapter ring, so you can use them with heads that have either a 100 or 75mm half ball. The legs support up to 44.1 pounds, which allows you to mount an appropriately sized fluid head, camera, and accessories without straining the capacity of the legs.

    With the included mid-level spreader attached the height of the legs can be adjusted from just under 2 to over 5 feet high, and the legs collapse to under 28 inches in length for transport and storage. Removing the included rubber feet reveals the dual spiked feet, which are useful for soft surfaces such as gravel, dirt, or sand. The legs weigh a mere 6.61 pounds, making them easy to take almost anywhere you can go.

    The integrated lever locks are strong, durable, and increase the torsional stability of the legs.
    The included adapter ring is removable and attaches with three mounting screws. Attaching the adapter converts the 100mm bowl into a 75mm bowl.
    The removable mid-level spreader enables using the legs on uneven terrain, and can be used to stabilize the legs on uneven surfaces such as stairs.
    UPC: 719821433972
In the Box
Bundle Items
  • Panhandle
  • Quick Release Camera Plate with Metric Ruler for Select Fluid Heads
  • Limited 2-Year Warranty (Additional 3 Years with Registration)
  • 100 to 75mm Adapter Ring
  • 3 x Rubber Foot
  • Limited 6-Month Warranty, Extendable to 5 Years with Product Registration

Also Includes

  • Padded Carry Bag
Table of Contents
  • 1Description
  • Nitrotech N8 Video Head
    Camera Plate
    Camera Plate Features Sliding Balance Plate
    Camera Mounting Screw 1 x 1/4"-20 Male
    1 x 3/8"-16 Male
    Tripod Platform
    Base Mount 3/8"-16 Thread
    Pan & Tilt
    Drag Control Continuous
    Drag Type Fluid
    Vertical Tilt +90 to -70
    Panning Range 360
    Physical
    Material Aluminum
    Load Capacity 17.6 lb / 8 kg
    Counter Balance Continuous
    Center of Gravity 2.2" / 55 mm
    Bubble Level 1 x Illuminated
    Base Diameter 2.95" / 75 mm
    Dimensions 5.8" / 14.7 cm
    Weight 4.8 lb / 2.2 kg
    Packaging Info
    Box Dimensions (LxWxH) 14.5 x 9.8 x 7.9"
  • Carbon Fiber Twin Leg Video Tripod Legs with Mid-Level Spreader (100/75mm Bowl)
    General
    Head Mount Type 100 mm Bowl
    Load Capacity 44.1 lb / 20.00 kg
    Maximum Working Height 60.24" / 153 cm (with Spreader)
    Minimum Working Height 23.03" / 58.5 cm (with Spreader)
    Folded Length 27.17" / 69 cm
    Materials Carbon Fiber
    Weight 6.61 lb / 3.00 kg
    Legs
    Leg Lock Type Lever Lock
    Leg Positions Continuously Adjustable
    Independent Leg Spread Yes
    Leg Sections 3
    Feet Features Dual Spiked
    Spreader Mid-Level (Included)
    Packaging Info
    Box Dimensions (LxWxH) 31.0 x 9.0 x 8.0"

Manfrotto MVKN8TWINMCUS Reviews

Is the half bowl a separate, detachable piece to ...

Is the half bowl a separate, detachable piece to allow the N8 head to operate on a flat base?
Asked by: Jeff
Manfrotto Nitrotech N8 Video Head 75mm flat-base head can be used with a half-ball adapter (available separately) for maximum flexibility in mounting to tripods, sliders, hi-hats, or other supports.
Answered by: Mark
Date published: 2019-05-15
  • y_2019, m_5, d_18, h_14CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.12
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_1
  • loc_en_US, sid_1432386, prod, sort_[SortEntry(order=HAS_STAFF_ANSWERS, direction=DESCENDING)]
  • clientName_bhphotovideo
Be the first to review this item

Manfrotto MVKN8TWINMCUS Q&A

Manfrotto MVKN8TWINMCUS Accessories

See any errors on this page? Let us know.